JS-6130 Fluorine Fluid
Product Information
Brand: Jingshang
Model: JS-6130
Color: Transparent liquid
Specifications: 1KG/barrel, 5KG/barrel, 25KG/barrel, 250KG/barrel
Shelf life: 24 months unopened
Boiling point: 130 ℃
JS-6130 fluorine fluid has the characteristics of colorless, odorless, no flash point, zero ozone depletion potential, low GWP, excellent stability, and material compatibility. It is widely used in many fields such as medical, electronic, precision equipment, optical lenses, semiconductors, new energy, and aerospace.
u Colorless, odorless, and non combustible;
u Low surface tension, low viscosity, low latent heat of evaporation;
u Excellent heat resistance, chemical resistance, and hydrolysis stability;
u It does not harm ozone and meets the relevant regulatory requirements of RoHS, REACH, and PFAS, making it a green and environmentally friendly product.
u Solvent: diluent used for anti fingerprint liquid, lubricant diluent;
u Drying: Drying after soaking in hydrocarbons or alcohol;
u Cleaning: metal degreasing cleaning, plastic cleaning, optical lens cleaning, dust removal;
u Coolant: Immersion cooling for data centers, semiconductor temperature control/coolant, power component cooling, food and medical industry cooling;
u Foaming: daily chemical foaming, polyurethane foaming;
Physical state | liquid |
Appearance/odor | Transparent colorless liquid with a slight ether odor |
PH value | Not applicable |
Pour a little | -128℃ |
boiling point | 130℃ |
Relative vapor density (air=1) | No information available |
Relative density (water=1) | one point six four |
Saturated vapor pressure (kPa) | zero point five |
Critical pressure (MPa) | No information available |
Evaporation rate | No information available |
Flash point (℃) | No flash point |
N-Octanol/Water Partition Coefficient | No information available |
Surface tension (dyn/cm) | sixteen |
Heat of vaporization (kJ/kg) | one hundred and eight |
Kinematic viscosity (cSt) | zero point nine |
Solubility of materials in water (ppm) | <10 |
Flammability | Non combustible |
JS-6130 fluorine fluid should be packaged in clean, dry, and free of other impurities storage tanks, with rubber covers lined and tightly sealed during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.
JS-6130 fluorine fluid is stored in a low-temperature, dry and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years; The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.
u This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.
u If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention; If in contact with skin, please wash thoroughly with soapy water.
u Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.
