JS-6058 Fluorine Fluid
Product Information
Brand: Jingshang
Model: JS-6058
Color: Transparent liquid
Specifications: 1KG/barrel, 5KG/barrel, 25KG/barrel, 250KG/barrel
Shelf life: 24 months unopened
Boiling point: 58 ℃
JS-6058 fluorine fluid is a non-conductive, thermally and chemically stable liquid that is highly suitable for many direct contact single-phase and two-phase low-temperature heat transfer applications, including testing, power electronics, and other electronic applications. The additional information is transparent, colorless, non-conductive, non flammable, residue free, thermally and chemically stable liquid, which is very suitable for many heat transfer fluid applications. Its compatibility makes it highly suitable for various electronic single-phase and two-phase heat transfer applications, including reliability testing, power conversion, and more. Due to the extremely narrow boiling point of JS-6058, its composition does not change over time, ensuring consistent transport performance.
u Good thermal stability
u Good chemical stability
u Good material compatibility
u Non flammable
u No irritating odor, non-toxic, good safety
u No damage to ozone
u Quality and reliability testing in the electronics industry.
Physical state: | Liquid |
Specific physical form: | Liquid |
colour | colourless |
smell | Odorless |
Olfactory threshold: | No information available |
PH value: | Not applicable |
Melting point/freezing point: | Not applicable |
Boiling point/initial boiling point/boiling range: | 58 ℃ |
Flash point: | No flash point |
Evaporation rate: | >1. No unit or not applicable. [Reference standard: molar ratio=1] |
Flammability (solid, gas): | Not applicable |
Combustion limit range (lower limit): | Not detected |
Burning limit range (upper limit): | Not detected |
Vapor pressure: | 29,557.5 Pa [@ 25 ℃ ] |
Steam density/steam relative density: | Approximately 11.7 units or not applicable. [@ 20 ℃] [Reference standard: Air=1] |
Density: | 1.68 g/ml |
Relative density: | 1.68 [Reference standard: Water=1] |
Solubility Water solubility: | 0 |
Solubility - Non water soluble: | No information available |
N-Octanol/Water Partition Coefficient: | No information available |
Spontaneous combustion temperature: | No information available |
Decomposition temperature: | Not applicable |
Viscosity: | 0.4 mm2/sec [@ 20 ℃ ] |
molecular weight | No information available |
Volatile Organic Compounds | No information available |
Percentage of volatile substances | 100 % |
Exempted anhydrous VOC solvents | No information available |
JS-6058 fluorine fluid should be packaged in clean, dry, and free of other impurities storage tanks, with rubber covers lined and tightly sealed during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.
JS-6058 fluorine fluid is stored in a low-temperature, dry and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years; The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.
u This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.
u If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention; If in contact with skin, please wash thoroughly with soapy water.
u Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.
