JS-6057 Fluorine Fluid
Product Information
Brand: Jingshang
Model: JS-6057
Color: Transparent liquid
Specifications: 1KG/barrel, 5KG/barrel, 25KG/barrel, 250KG/barrel
Shelf life: 24 months unopened
Boiling point: 57 ℃
JS-6057 fluorine fluid has zero ozone depletion potential (zero ODP): low molecular weight perfluoropolyethers (PFPEs) exhibit a wide range of boiling points from 55 ° C to 135 ° C, and they do not contain fluorocarbons (CFCs), chlorine, bromine, and iodine. They do not require special protective measures or usage restrictions, and they are fully compatible with all metals, various rubbers, and commercially available elastomers and plastics. The formula of JS-6057 liquid is completely miscible with PFPE oil and grease. They are completely miscible with perfluorocarbon (PFC) liquids and chlorotrifluoroethylene (CTFE) oils above 45 ° C.
u security
u Non flammable
u non-toxic
u Pump cleaning
u Degreasing operation
u Steam coverage
u Improve flash point
u Eliminate traces
u lubricant
appearance | Transparent liquid |
colour | colourless |
smell | Odorless |
Odor threshold | No information available |
Melting point/freezing point | Melting point/melting point range:<110 ° C (1013.25 hPa) |
Boiling point, initial boiling point, and boiling range | 57℃ |
Flammability (solid, gas) | No information available |
Flammability (liquid) | This product is not flammable. |
Burning/explosion limit | No information available |
Flash point (open cup) | Method: According to a standardized approach No flash fire occurred, boiled before the flash point |
Spontaneous combustion temperature | No information available |
decomposition temperature | > 290 °C |
PH value | PKa: Non ionizing product |
Vapor pressure | 296 hectopascals (20 ° C) |
density | 1.68 g/cm3 (20 ° C) (1013.25 hectopascals) |
Density/relative density | 1.68 (20 ° C) (1013.25 hectopascals) |
Steam density | No information available |
Solubility | Water solubility: 0.47 mg/l (20 ° C) Method: OECD Test Guidelines 105 |
Octanol/water partition coefficient | log Pow: 5.58 ( 20 °C) Method: OECD Test Guidelines 105 |
viscosity | Dynamic viscosity: 0.748 0.931 mPa. s (20 ° C) Kinematic viscosity: 0.35 0.46 mm2/s (20 ° C) |
Particle characteristics | No information available |
Evaporation rate (Butylacetate=1) | No information available |
JS-6057 fluorine fluid should be packaged in clean, dry, and free of other impurities storage tanks, with rubber covers lined and tightly sealed during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.
JS-6057 fluorine fluid is stored in a low-temperature, dry and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years; The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.
u This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.
u If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention; If in contact with skin, please wash thoroughly with soapy water.
u Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.
