Products

Perfluoropolyether solution
Perfluoropolyether solution,CAS NO.:86508-42-1
Product description

JS-6049 Fluorine Fluid

Product Information

Brand: Jingshang

Model: JS-6049

Color: Transparent liquid

Specifications: 1KG/barrel, 5KG/barrel, 25KG/barrel, 250KG/barrel

Shelf life: 24 months unopened

Boiling point: 49

 

Product Introduction

JS-6049 electric fluorine fluid is a transparent, colorless, non-conductive, non flammable, residue free, thermally and chemically stable liquid that is highly suitable for various heat transfer fluid applications. Its compatibility makes it highly suitable for various electronic single-phase and two-phase heat transfer applications, including reliability testing, power conversion, and more.  Due to the extremely narrow boiling point of JS-6049, its composition does not change over time, ensuring consistent transport performance. 

 

Product Features

Thermal stability

Chemical stability

Wide range of liquids

Non-conductive

Narrow boiling point range

compatibility

 

Product Usage

Application of single-phase and two-phase heat transfer fluids

Semiconductor packaging testing

Power electronics and computer cooling

 

technical parameter

Physical state  

liquid  

Specific physical form:  

liquid  

colour  

colourless  

smell  

Odorless  

Olfactory threshold  

No information available  

PH value  

Not applicable  

Melting point/freezing point  

Not applicable  

Boiling point/Initial boiling point/Boiling range  

49 ℃  

flash point  

No flash point  

Evaporation rate  

>1. No unit or not applicable.  [Reference standard: molar ratio=1]  

Flammability (solid, gas)  


Combustion limit range (lower limit)  

Not detected  

Burning limit range (upper limit)  

Not detected  

Vapor pressure  

35,197 Pa [@ 20 ]  

Steam density, steam relative density  

10.3 [@ 20 ] [Reference standard: Air=1]

density  

1.71 g/ml  

relative density  

1.71 [Reference standard: Water=1]  

Solubility - Water solubility  

0  

Solubility - Non water soluble  

No information available  

N-Octanol/Water Partition Coefficient  

No information available  

Spontaneous combustion temperature  

No information available  

decomposition temperature  

No information available  

viscosity  

0.4 mm2/sec  

Volatile Organic Compounds  

[Details: Exemption]  

Percentage of volatile substances  

100 %  

Exempted anhydrous VOC solvents  

[Details: Exemption]  

molecular weight  

Not applicable

 

 

Product packaging

JS-6049 fluorine fluid should be packaged in clean, dry, and free of other impurities storage tanks, with rubber covers lined and tightly sealed during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.

 

Product storage

JS-6049 fluorine fluid is stored in a low-temperature, dry and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years;  The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.

 

Precautions for use

This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.

If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention;  If in contact with skin, please wash thoroughly with soapy water.

Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.