Products

Perfluoropolyether solution
Perfluoropolyether solution,CAS NO.:60164-51-4
Product description

JS-6177 Fluorine Fluid

Product Information

Brand: Jingshang

Model: JS-6177

Color: Transparent liquid

Specifications: 1KG/barrel, 5KG/barrel, 25KG/barrel, 250KG/barrel

Shelf life: 24 months unopened

Boiling point: 177

 

Product Introduction

JS-6177 fluorine fluid is a perfluoropolyether product, which has more stable properties and is more environmentally friendly compared to other fluorine fluids on the market (hydrofluoroethers, hydrofluorohydrocarbons, perfluorocarbons, perfluoroketones).  Used for liquid cooling and immersion liquid cooling of data center servers, without the need for air conditioning cooling, greatly reducing the power consumption of the data center. The PUE reaches below 1.1, saving more than 85% energy compared to traditional air conditioning air cooling.

 

Product advantages

Low degree of aggregation

Low molecular weight

Low boiling point

Low viscosity

 

Product Usage

Data center server liquid cooling

Immersion liquid cooling

 

technical parameter

Appearance and Characteristics  

Colorless viscous liquid  

smell  

tasteless  

Odor threshold  

No information available  

PH value  

neutral  

Melting point/freezing point  

Not applicable  

Boiling point, initial boiling point, and boiling range  

177 ℃  

flash point  

No flash point (closed cup)  

Evaporation rate  

No information available  

Flammability (solid, gas)  

Not applicable  

Explosion upper limit  

No information available  

Lower explosive limit  

No information available  

Vapor pressure  

No information available  

Vapor density  

No information available  

density  

1.74-1.85g/  mL@25  ℃  

Solubility  

Insoluble in water, soluble in fluorinated solvents  

N-Octanol/Water Partition Coefficient  

No information available  

Spontaneous combustion temperature  

No information available  

decomposition temperature  


viscosity  

No information available

 

Product packaging

JS-6177 fluorine fluid should be packaged in clean, dry, and free of other impurities storage tanks, with rubber covers lined and tightly sealed during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.

 

Product storage

JS-6177 fluorine fluid is stored in a low-temperature, dry and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years;  The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.

 

Precautions for use

This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.

If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention;  If in contact with skin, please wash thoroughly with soapy water.

Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.