Products

Fluorine coating agent
Fluorine coating agent,CAS NO.:163702-07-6
Product description

JS-3063-25 Metal Anti fouling Coating Agent

Product Information

Brand: Jingshang

Model: JS-3063-25

Color: Transparent liquid

Specifications: 1KG/barrel, 5KG/barrel, 25KG/barrel, 250KG/barrel

Shelf life: 24 months unopened

Boiling point: 63

 

Product Introduction

JS-3063-25 metal anti fouling coating is a polymer carried by a transparent, low viscosity, low surface tension fluorosilane solution in a hydrofluoroether solvent.  This coating is designed for easy cleaning and anti fouling functions on various surfaces, such as glass flat panel displays and mobile electronic device components.  The coating dries into a thin, transparent, and permanent film with good hydrophobic and oleophobic properties.  Post curing provides additional durability and wear resistance.  It is non flammable, low toxicity, does not deplete the ozone layer, and complies with RoHS standards.

 

Product Features

Air dries within seconds and has wear resistance

Adhere to various surfaces, including glass, metals, and metal oxides.

Has excellent anti wetting, anti adhesive, and anti offset properties.

Does not contain volatile organic compounds (VOCs) and has low global warming potential

Does it have optical transparency and no additional haze or loss of clarity

 

Product Usage

Touchscreens, LCD and tablet displays, mobile electronic handheld devices, electronic tablets, and other electronic components and devices provide easy to clean, dirt resistant protection

Anti stick coatings for LCD displays, micro motors or MEMS (Micro Electro Mechanical Systems) components, anti migration coatings for displays, spindle motors or lubricated electronic components

Anti corrosion coatings for various materials and components

 

technical parameter

Physical state  

Liquid  

Specific physical form  

Liquid  

Appearance/odor  

Transparent colorless liquid with a slight odor  

Olfactory threshold  

No information available  

PH value  

Not applicable  

Melting point/freezing point  

-135 ℃  

Boiling point/Initial boiling point/Boiling range  

63 [@ 101,324.72 Pa ]  

flash point  

No flash point  

Evaporation rate  

49 [Reference standard: molar ratio=1]  

Flammability (solid, gas)  


Combustion limit range (lower limit)  

[Detailed information: None (ASTM E681-94, @ 100C)]  

Burning limit range (upper limit)  

[Detailed information: None (ASTM E681-94, @ 100C)]  

Vapor pressure  

 26,931 Pa [@ 25 ]  

Vapor density  

8.6 [Reference standard: Air=1]  

density  

 1.55 g/ml  

relative density  

1.5 [Reference standard: Water=1]  

Water solubility  

< 12 ppm  

Solubility - Non water soluble  

No information available  

N-Octanol/Water Partition Coefficient  

No information available  

Spontaneous combustion temperature  

405 [Detailed information: (ASTM E659-84)]  

decomposition temperature  

No information available  

viscosity  

0.001 Pa-s [@ 23 ]  

Volatile Organic Compounds  

[Details: Exemption]  

Percentage of volatile substances  

>99% weight ratio  

Exempted anhydrous VOC solvents  

[Details: Exemption]

 

Product packaging

JS-3063-25 metal anti fouling coating agent should be packaged in a clean, dry, and free of other impurities storage tank. The packaging should be lined with a rubber cover and tightly sealed. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.

 

Product storage

JS-3063-25 metal anti fouling coating agent should be stored in a low-temperature, dry and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years;  The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.

 

Precautions for use

This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.

If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention;  If in contact with skin, please wash thoroughly with soapy water.

Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.