Products

Perfluorocarbon
Perfluorocarbon,CAS NO.:163702-05-4
Product description

JS-2112 Fluorocarbon Solvent

Product Information

Brand: Jingshang

Model: JS-2112

Color: Transparent liquid

Specifications: 1KG/barrel, 5KG/barrel, 25KG/barrel, 250KG/barrel

Shelf life: 24 months unopened

Boiling point: 112

 

Product Introduction

JS-2112 fluorocarbon solvent is colorless, odorless, non-toxic, safe and non flammable, has mild solubility, is insoluble in water, has good thermal stability, high density, low surface tension, low viscosity, low latent heat of evaporation, and excellent material compatibility.

 

Product advantages

Mild solubility

Can be used as a solvent for polyfluoroether, and can be used to prepare fingerprint oil solutions, anti fouling coatings, and nano coatings.

Environmentally friendly

The ozone depletion potential (ODP) is 0, and the global greenhouse effect potential (GWP) is 120.

Green and reliable

The coolant is green and non-toxic.  Excellent compatibility, compatible with the vast majority of metals, plastics, and rubber materials.

Good safety

Excellent stability at high temperatures and not easily decomposed as a solvent.  Good electrical insulation performance, non-conductive and non leakage.

 

Product Usage

Industrial cleaning

Electronic product processing

Fingerprint oil solvent

Metal antibacterial and oil resistant

coolant

 

technical parameter

Appearance and Characteristics  

Colorless Transparent Liquid  

smell  

Extremely low odor  

PH value  

neutral  

Boiling point  

112 ℃  

Moisture content  

<00.0050%  

Flash point  

nothing  

Spontaneous combustion  

Non flammable  

Explosive nature  

The product is non explosive  

Vapor pressure  

No valid data available  

Water solubility  

Difficult to dissolve in water  

Specific gravity  

Approximately 1.67 water=1  

Vapor pressure  

No valid data available  

Volatile Organic Compounds  

Not applicable  

Evaporation rate  

>5.0 Butyl acetate=1  

Insulation Endurance  

>4 kV

 

Product packaging

JS-2112 fluorocarbon solvents should be packaged in clean, dry, and free of other impurities storage tanks, with rubber covers lined and tightly sealed during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.

 

Product storage

JS-2112 fluorocarbon solvent should be stored in a low-temperature, dry and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years;  The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.

 

Precautions for use

This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.

If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention;  If in contact with skin, please wash thoroughly with soapy water.

Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.