Products

Fluorocarbon hydrogen ether
Fluorocarbon hydrogen ether,CAS NO.:163702-07-6
Product description

JS-1130 Electronic Fluorination Liquid

Product Information

Brand: Jingshang

Model: JS-1130

Color: Transparent liquid

Specifications: 1KG/barrel, 5KG/barrel, 25KG/barrel, 250KG/barrel

Shelf life: 24 months unopened

Boiling point: 130

 

Product Introduction

JS-1130 electronic fluorinated liquid is a non flammable liquid with a very low global warming potential. It has excellent anti-corrosion and dielectric properties, making it a viable alternative to liquids with high global warming potential, such as perfluorocarbons and PPPs, in various applications.  It has a very low global warming potential (GWP) and can reduce greenhouse gas emissions compared to perfluorocarbons without affecting performance.

 

Product Features

Thermal management has a wide range of applications

Wide range of liquids

Non flammable

Non-conductive

Compatible with plastics

Low toxicity

Low Global Warming Potential

Ozone Zero Depletion Potential

Exemption from solvents (US Environmental Protection Agency)

 

Product Usage

conduct heat

Sedimentation solvent

test equipment

Semiconductor cooling

Lubricant deposition

Data center immersion cooling

It can be used in spray formulation 

 

technical parameter

Physical state  

Liquid  

Appearance/odor  

Transparent colorless liquid with a slight ether odor  

PH value  

Not applicable  

Pour a little  

-128℃  

boiling point  

130 ℃  

Relative vapor density (air=1)  

No information available  

Relative density (water=1)  

one point six four  

Saturated vapor pressure (kPa)  

zero point five  

Critical pressure (MPa)  

No information available  

Evaporation rate  

No information available  

Flash point ()  

No flash point  

N-Octanol/Water Partition Coefficient  

No information available  

Surface tension (dyn/cm)  

sixteen  

Heat of vaporization (kJ/kg)  

one hundred and eight  

Kinematic viscosity (cSt)  

zero point nine  

Solubility of materials in water (ppm)  

<10  

Flammability  

Non combustible

 

Product packaging

JS-1130 electronic fluorine solution should be packaged in a clean, dry, and free of other impurities storage tank, with a rubber lined cover and encrypted seal during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.

 

Product storage

JS-1130 electronic fluoride solution is stored in a low-temperature, dry, and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years;  The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.

Precautions for use

This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.

If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention;  If in contact with skin, please wash thoroughly with soapy water.

Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.