JS-1095 Electronic Fluorination Liquid
Product Information
Brand: Jingshang
Model: JS-1095
Color: Transparent liquid
Specifications: 1KG/barrel, 5KG/barrel, 20KG/barrel, 250KG/barrel
Shelf life: 24 months unopened
Boiling point: 95 ℃
JS-1095 electronic fluorinated liquid is a hydrofluoroether (HFE) with an ozone depletion potential (ODP) of 0 and a global warming potential (GwP) of 580. This fluorinated solvent has little impact on the environment.
u It has low surface tension and high permeability, so it can even eliminate particles remaining in small gaps.
u Boiling point of 56 ° C - lower compared to water/IPA (2-propanol)/hydrocarbon solvents - it is very suitable for drying heat-resistant components.
u Electronic product cleaning agents, such as cleaning circuit boards
u Lithium battery electrolyte additive to increase electrolyte cut-off voltage
u The use of diluent for anti fingerprint oil products
boiling point | 95 ℃ |
melting point | -94℃ |
Flash point (℃) | No flash point |
form | Transparent liquid |
density | 1.533 @ 25 °C |
Ozone depletion potential | 0 |
Global warming potential | Not yet determined |
molecular weight | two hundred and thirty-two point zero seven |
Steam pressure | 20.9 Kpa @ 49.5 °C |
JS-1095 electronic fluoride solution should be packaged in a clean, dry, and free of other impurities storage tank, with a rubber lined cover and encrypted seal during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.
JS-1095 electronic fluoride solution is stored in a low-temperature, dry and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years; The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.
u This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.
u If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention; If in contact with skin, please wash thoroughly with soapy water.
u Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.
