JS-1079 Electronic Fluorination Liquid
Product Information
Brand: Jingshang
Model: JS-1079
Color: Transparent liquid
Specifications: 1KG/barrel, 5KG/barrel, 20KG/barrel, 250KG/barrel
Shelf life: 24 months unopened
Boiling point: 79 ℃
JS-1079 electronic fluorine solution is a transparent, colorless, low odor fluid that can be used to replace 1,1,1-trichloroethane and perfluoroethylene in film cleaning applications. This liquid has zero ozone depletion potential and low global warming potential (GWP); Not volatile organic compounds (VOCs) *; And it has been listed as a clean air solvent by the California South Coast Air Quality Management Area. Its toxicity is very low, with a time weighted exposure guideline of 200ppm (average 8 hours). The boiling point of JS-1079 is higher than most chlorofluorocarbons, HCFCs, and hydrofluorocarbons, reducing evaporation losses. The low surface tension and improved solvency of JS-1079 fluid, combined with its chemical and thermal stability, non flammability, and good compatibility with thin film substrates, make it an ideal solvent for thin film cleaning.
u Ozone Zero Depletion Potential
u Low Global Warming Potential
u Non volatile organic compounds
u Listed as a clean air solvent by the California South Coast Air Quality Management Area
u Thin film cleaning solvent
Physical state: | Liquid |
Specific physical form: | Liquid |
colour | colourless |
smell | Light odor |
Olfactory threshold: | No information available |
PH value: | Not applicable |
Melting point/freezing point: | -138℃ |
Boiling point/initial boiling point/boiling range: | 79 ℃ |
Flash point: | No flash point |
Evaporation rate: | 33 [Reference standard: molar ratio=1] |
Flammability (solid, gas): | |
Combustion limit range (lower limit): | 210 g/m3 [Detailed information: ASTM E681-94 method] |
Burning limit range (upper limit): | 1070 g/m3 [Detailed information: ASTM E681-94 method] |
Vapor pressure: | 14,532.1 Pa [@ 25 ℃ ] |
Steam density: | 9.1 [Reference standard: Air=1] |
Density: | 1.43 g/ml |
Relative density: | 1.43 [Reference standard: Water=1] |
Solubility Water solubility: | 0 |
Solubility - Non water soluble: | No information available |
N-Octanol/Water Partition Coefficient: | 4.2 [Detailed information: at 30 ° C] |
Spontaneous combustion temperature: | 375 ℃ [Detailed information: Test method ASTM E659-78] |
Decomposition temperature: | Not applicable |
Viscosity: | 0.4 mm2/sec |
molecular weight | No information available |
Percentage of volatile substances | 100% |
Volatile Organic Compounds | [Details: Exemption] |
Exempted anhydrous VOC solvents | [Details: Exemption] |
JS-1079 electronic fluorine solution should be packaged in a clean, dry, and free of other impurities storage tank, with a rubber lined cover and encrypted seal during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.
JS-1079 electronic fluoride solution is stored in a low-temperature, dry, and ventilated place (avoiding direct sunlight exposure). The shelf life of unopened products is 2 years; The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.
u This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.
u If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention; If in contact with skin, please wash thoroughly with soapy water.
u Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.
