Products

Fluorocarbon hydrogen ether
Fluorocarbon hydrogen ether,CAS NO.:156-60-5
Product description

JS-1078-E Electronic Fluorinated Liquid

Product Information

Brand: Jingshang

Model: JS-1078-E

Color: Transparent liquid

Specifications: 1KG/barrel, 5KG/barrel, 20KG/barrel, 250KG/barrel

Shelf life: 24 months unopened

Boiling point: 78

 

Product Introduction

JS-1078-E electronic fluorine liquid is a low viscosity, colorless, transparent perfluorinated chemical with good chemical inertness, electrical insulation properties, thermal conductivity, and unique low surface tension.  Widely used in the electronic manufacturing industry to meet customers' diverse requirements in heat conduction, manufacturing, and testing.  The chemical inertness of JS-1078-E electronic fluorine solution gives it good material compatibility, and it will not cause harm even when in direct contact with sensitive electronic components.  The tested components also do not need to be cleaned.  At the same time, this series of products has the characteristics of being non-toxic, non flammable, and odorless, making them very safe to use.

 

Product Features

Non flammable

Non-conductive

Low toxicity

Low Global Warming Potential (GWP)

Ozone Zero Depletion Potential

Excellent effect on removing ion pollution

Low surface tension penetrates narrow spaces to improve cleanliness

 

Product Usage

Cleaning, rinsing, and drying agents

Cleaning of oil, grease, and wax

Application of special solvents

 

technical parameter

Physical state:  

Liquid  

Specific physical form:  

Liquid  

colour  

colourless  

smell  

Slightly odorous  

Olfactory threshold:  

No information available  

PH value:  

Not applicable  

Melting point/freezing point:  

Not applicable  

Boiling point/initial boiling point/boiling range:  

78 ℃  

Flash point:  

No flash point [detailed information: testing method according to ASTM D 3278-96]

Evaporation rate:  

No information available  

Flammability (solid, gas):  


Combustion limit range (lower limit):  

7.3% volume ratio [Detailed information: @ 25 C, testing method according to ASTM E-681-98 (Appendix A1)]  

Burning limit range (upper limit):  

15% volume ratio [detailed information: @ 25 C, testing method according to ASTM E-681-98 (Appendix A1)]  

Vapor pressure:  

46,662.7 Pa [@ 25 ]  

Vapor density:  

No information available  

Density:  

1.28 g/ml  

Relative density:  

1.28 [Reference standard: Water=1]  

Solubility Water solubility:  

Negligible  

Solubility - Non water soluble:  

No information available  

N-Octanol/Water Partition Coefficient:  

No information available  

Spontaneous combustion temperature:  

396 ℃  

Decomposition temperature:  

Not applicable  

Viscosity:  

0.45 mPa-s  

molecular weight  

No information available  

Volatile Organic Compounds  

896 g/l [Test method: South Coast Air Quality Management Agency of the United States]  

Percentage of volatile substances  

100 %  

Exempted anhydrous VOC solvents  

896 g/l [Test method: Calculated according to SCAQMD standard 443.1]

 

Product packaging

JS-1078-E electronic fluorine solution should be packaged in a clean, dry, and free of other impurities storage tank. During packaging, it should be lined with a rubber cover and sealed tightly. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.

 

Product storage

JS-1078-E electronic fluoride solution should be stored in a low-temperature, dry, and ventilated place (avoiding direct sunlight exposure). The shelf life of unopened products is 2 years;  The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.

 

Precautions for use

This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.

If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention;  If in contact with skin, please wash thoroughly with soapy water.

Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.