Products

Fluorocarbon hydrogen ether
Fluorocarbon hydrogen ether,CAS NO.:156-60-5
Product description

JS-1078-A Electronic Fluorination Liquid

Product Information

Brand: Jingshang

Model: JS-1078-A

Color: Transparent liquid

Specifications: 1KG/barrel, 5KG/barrel, 20KG/barrel, 250KG/barrel

Shelf life: 24 months unopened

Boiling point: 78

 

Product Introduction

JS-1078-A electronic fluorinating liquid is a mixture composed of hydrofluoroether methyl non fluorobutyl ether (C4F9OCH3), ethyl non fluorobutyl ether (C4F9OC2H5), trans-1,2-dichloroethylene (t-DCE), and isopropanol.  This solvent mixture is a mixture of azeotropes.  Analysis was conducted during evaporation and extended use in steam degreasers, and it was found to have consistent composition, which is effective for medium to heavy-duty degreasing and degreasing applications.  72DA fluid is ideal for a wide range of electronic products and other precision cleaning applications.  It intends to replace chlorofluorocarbons, HCFCs, hydrofluorocarbons, nPBs, and chlorinated solvents.  This product has zero ozone depletion potential and other good environmental, health, and safety features.

 

Product Features

Safe and non flammable

Good solubility, insoluble in water

Good thermal stability

Zero ODP value, no damage to the ozone layer

Low greenhouse effect value

Excellent material compatibility

 

Product Usage

Cleaning, rinsing, and drying agents

Cleaning of rosin flux residue, oil, grease, and wax

Professional electronic cleaning heat conduction

 

technical parameter

Physical state:  

Liquid  

Specific physical form:  

Liquid  

colour  

colourless  

smell  

Slightly odorous  

Olfactory threshold:  

No information available  

PH value:  

Not applicable  

Melting point/freezing point:  

Not applicable  

Boiling point/initial boiling point/boiling range:  

78 ℃  

Flash point:  

No flash point [detailed information: tested according to ASTM D-3278-96 e-1 method]  

Evaporation rate:  

No information available  

Flammability (solid, gas):  


Combustion limit range (lower limit):  

5.9% volume ratio [detailed information: tested according to ASTM Method E681-98 (Attachment A1)]

Burning limit range (upper limit):  

14.5% volume ratio [detailed information: tested according to ASTM Method E681-98 (Attachment A1)]

Vapor pressure:  

47,995.9 Pa [@ 25 ]  

Vapor density:  

2.26 [@ 25 ] [Reference standard: Air=1]

Density:  

1.27 g/ml  

Relative density:  

1.27 [Reference standard: Water=1]  

Water solubility:  

A small amount (less than 10%)  

Solubility - Non water soluble:  

No information available  

N-Octanol/Water Partition Coefficient:  

No information available  

Spontaneous combustion temperature:  

408 ℃  

Decomposition temperature:  

Not applicable  

Viscosity:  

0.4 mPa-s  

molecular weight  

No information available  

Volatile Organic Compounds  

889 g/l [Test method: South Coast Air Quality Management Agency, United States]  

Percentage of volatile substances  

100 %  

Exempted anhydrous VOC solvents  

889 g/l [Test method: According to the South Coast Air Quality Management Agency of the United States]

 

Product packaging

JS-1078-A electronic fluorine solution should be packaged in a clean, dry, and free of other impurities storage tank, with a rubber lined cover and encrypted seal during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.

 

Product storage

JS-1078-A electronic fluoride solution is stored in a low-temperature, dry, and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years;  The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.

 

Precautions for use

This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.

If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention;  If in contact with skin, please wash thoroughly with soapy water.

Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.