JS-1063 Electronic Fluorination Liquid
Product Information
Brand: Jingshang
Model: JS-1063
Color: Transparent liquid
Specifications: 1KG/barrel, 5KG/barrel, 20KG/barrel, 250KG/barrel
Shelf life: 24 months unopened
Boiling point: 63 ℃
JS-1063 electronic fluorinated liquid is a transparent, colorless, low odor fluid used in the electronics industry as a diluent for fluoropolymers. It is designed to replace ozone depleting substances (ODSs) and compounds with high global warming potential (GWP) in many applications. It has one of the best toxicological characteristics of CFC substitute materials, with a time weighted average exposure guideline of 750 ppm (average 8 hours).
u Odorless, non-toxic, and human friendly;
u No flash point, non combustible, safe to use;
u Chlorine free, with zero ozone depletion potential (ODP); Low global warming value (GWP); Environmentally friendly;
u Low surface tension, low viscosity, and good leveling properties;
u High dielectric performance and high insulation performance;
u Compatibility of fluorine compounds;
u AF anti fingerprint diluent;
u Fluorine based three proof paint thinner;
u Dry film oil;
u Leak detection and heat transfer fluid testing;
u Diluents for fluorine chemical synthesis;
u Foam material foaming agent
Appearance and characteristics: | Colorless and transparent liquid. |
smell | No data available |
Odor threshold | No data available |
PH value | No data available |
Melting point/freezing point | Melting point/melting point range: -135 ° C |
Initial boiling point and boiling range | 63°C |
flash point | No data available |
Evaporation rate | No data available |
Flammability (solid, gas) | No data available |
High/low flammability or explosive limits | No data available |
Vapor pressure | 200 mmHg |
Relative vapor density (air=1.0) | No data available |
Relative density (water=1.0) | 1.52g/ ml@28 ℃ |
Water solubility | 12 ppmw |
Logarithmic value of octanol/water partition coefficient | No data available |
Spontaneous combustion temperature | No data available |
decomposition temperature | No data available |
viscosity | No data available |
JS-1063 electronic fluorine solution should be packaged in a clean, dry, and free of other impurities storage tank, with a rubber lined cover and encrypted seal during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.
JS-1063 electronic fluoride solution is stored in a low-temperature, dry, and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years; The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.
u This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.
u If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention; If in contact with skin, please wash thoroughly with soapy water.
u Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.