JS-1056 Electronic Fluorination Liquid
Product Information
Brand: Jingshang
Model: JS-1056
Color: Transparent liquid
Specifications: 1KG/barrel, 5KG/barrel, 20KG/barrel, 250KG/barrel
Shelf life: 24 months unopened
Boiling point: 56 ℃
JS-1056 electronic fluorinated liquid is a newly developed fluorinated liquid with an environmentally friendly HFE structure by our company.
u Non flammable and quick drying, easy to use
u Excellent human safety (allowable concentration of 500ppm)
u Due to the absence of lightning and excellent quick drying, it is easy to operate
u Excellent environmental performance (low GWP, ozone depletion coefficient of 0)
u Due to the low viscosity in low-temperature areas, the viscosity resistance is reduced, contributing to energy conservation
u Cleaning related
Precision cleaning of electronic products, etc
Light oil cleaning
Fluorine compound cleaning
u Solvent related
Lubricant solvent
Reaction solvent
u Related to heat medium
Semiconductor coolant
Start fluid for heat pipes and heat pumps
Physical state | liquid |
colour | colourless |
smell | Special odor |
Olfactory threshold | up in the air |
PH value | Not applicable |
melting point | -92℃ |
Boiling point/initial boiling point/boiling range: | 56 ℃ |
Flash point: | Not applicable |
Evaporation rate: | 33 [Reference standard: molar ratio=1] |
Flammability (solid, gas): | Not applicable |
Explosion limit | Not applicable |
Lower explosive limit | 5.4 Vol % |
Explosion upper limit | 18.9 Vol % |
Vapor pressure at 25 ℃ | 32 kPa |
Vapor pressure | |
Steam density: | 6.3 g/cm³ |
Relative density at 25 ℃ | one point three nine |
Solubility Water solubility: | 0 |
Solubility - Non water soluble: | No information available |
N-Octanol/Water Partition Coefficient at 25 ℃ | 2.0 log POW |
Spontaneous combustion temperature | No further information available |
decomposition temperature | No further information available |
Viscosity | |
kinematics | No further information available |
dynamic | No further information available |
Solubility water | No further information available |
Natural temperature | up in the air |
The danger of explosion | This product does not pose a risk of explosion |
Evaporation rate | No further information available |
JS-1056 electronic fluorine solution should be packaged in a clean, dry, and free of other impurities storage tank, with a rubber lined cover and encrypted seal during packaging. 1KG/barrel, 5KG/barrel, and 20KG/barrel are all made of HDPE material, while 250KG/barrel is made of iron plastic composite steel barrel. If the customer has requirements, packaging shall be carried out according to the customer's requirements.
JS-1056 electronic fluoride solution is stored in a low-temperature, dry and ventilated place (avoiding direct sunlight), and the shelf life of unopened products is 2 years; The shelf life after opening is affected by protective measures, and under sealed low-temperature and dry conditions, the shelf life is more than six months.
u This product must be used within its shelf life and should be opened and used immediately. Before use, be sure to read the product MSDS.
u If it splashes into the eyes during use, immediately rinse with plenty of water and seek medical attention; If in contact with skin, please wash thoroughly with soapy water.
u Avoid contact with high temperatures or alkaline earth metals during use, as they can easily decompose and reduce performance.
